Fpro G is THE gravity-fed spray gun available in compliant and conventional versions for high transfer efficiency. Perfectly balanced, the Fpro G provides superior finish for low viscosity materials...

Perfectly balanced, the Fpro P, pressure paint spray gun, provides a superior finish for all painters. Sames offers the largest range of spray guns and accessories for all Fpro applications in the...

Fpro S Airspray Conventional manual suction spray gun Perfectly balanced, the Fpro S suction paint spray gun provides a superior finish for all levels of painters. Sames offers the largest range...

A25 F Flowmax® Automatic Airspray Spray Gun The automatic A25F benefits from the Flowmax® technology, which guarantees a very high reliability and possibility to spray critical products...

PPH707 SB Robotic Rotary Atomizer for Solvent-Based Material The PPH707 SB is a robotic sprayer designed for electrostatic applications with internal charge of solvent-based paint offering a wide...

BSC300 Bell Speed Controler The BSC300 module drives a Rotary bell atomizer : PPH707, PPH308, Nanobell, Accubell 709 Evo. The bell speed Controler for all rotary bell atomizer. Bell cup...

GNM300 High voltage control module The GNM300 controls the high voltage unit (HVU) for electrostatic guns and bell sprayers. Guarantee of performances and safety of your painting equipment...

Nanogun+ Airspray Manual Low Pressure Electrostatic Gun The Nanogun+ Airspray is specially designed for spraying liquid solvent-based materials at low pressures in many markets. Its lightweight...

SILRES® H62 C Silicone Resins SILRES® H62 C is a liquid, solvent-free one-part heat-curing phenyl silicone resin formulation. The product is ideal to impregnate electrical coils of...

ELASTOSIL® RT 705 1-part heat-curing silicone rubber ELASTOSIL® RT 705 is a self-levelling, slightly thixotropic, one-part heat-curing silicone for potting and coating applications...

ELASTOSIL® RT 772 Room Temperature Curing Silicone Rubber (RTV-2) ELASTOSIL® RT 772 is a flowable, condensation curing RTV-2 silicone for potting and coating applications. When...

1-part heat-curing silicone rubber ELASTOSIL® RT 702 is a non-slump, one-part heat-curing silicone adhesive. Cured ELASTOSIL® RT 702 shows very good adhesion to many substrates and...

Room Temperature Curing Silicone Rubber (RTV-2) SEMICOSIL® 811 is a non-slump silicone that is designed for oven free processing and fast adhesion built-up at room temperature or minimum...

Thermally Curing Silicone Rubber (RTV-2) SEMICOSIL® 988/1K is a non-slump, thermally curable, addition curing one-part silicone rubber Properties Ready-to-use, one-part silicone...

Room Temperature Curing Silicone Rubber (RTV-2) ELASTOSIL® RT 722 RB A/B is a thixotropic, thermally curable, addition-curing two-component silicone sealing adhesive that cures to an...

An outstanding thermal stability, even under the presence of air, allows a higher thermal utilization in comparison with other liquid coolants. When used as coolant and insulation fluid,...

Product advantage Manufacture 6640 class h insulation material nmn dupont nomex paper nmn film –6640 Nomex paper/Polyester film/Nomex paper flexible composite material is made of two layers of...

Motor Transformer Motor Insulators Electrical Winding Insulation Winding Wire Coating Insulation Insulating...

The AHA is suitable for slot, liner, phase, and turn-to-turn insulation in H and C-class electrical motors. It can be used as interlayer insulation in high voltage transformers and other electrical...

JF-9956-3E is composed of modified unsaturated polyester imide, environmental polyfunctional acrylic ester, initiator and inhibitor etc. JF-9956-3E is available in one component. This mentioned...

JF-9956-3 is composed of unsaturated polyesterimide resin, active crosslinking monomer, initiator etc. JF-9956-3 is available in one component...

Low volatility: Emissions during curing are less than 5%. Excellent water resistance: Water absorption rate is significantly lower than existing insulating resins. High adhesion strength:...

WHOLESALE VELCRO SANDPAPER   RIKEN RMC purple color AP50M uses special paper and abrasive grain and advanced technology, which make the product with the new appearance purple color...

Excelite EP is a multi-purpose grease supplemented with extreme pressure additives that provide superior load-bearing capacity and wear resistance, making it suitable for harsh operating conditions,...

MULTEMP AC-D is a lithium grease formulated from synthetic hydrocarbon oil, offering excellent compatibility with plastics, making it suitable for a wide range of applications across various...

Raremax AF-I bearing grease is made from refined mineral oil as base oil and urea as thickener. This product is outstanding for its anti-wear ability and good performance under severe conditions such...

Mẫu mã: ONE-LUBER MO NO.2 Quy cách đóng gói: 18KG Mã sản phẩm (L-): L Loại: Mỡ bôi trơn cho ổ bi Lĩnh vực ứng dụng: Mỡ cho...

Multemp AC-N Multemp AC-N is a lithium grease formulated from synthetic hydrocarbon oil and synthetic ester oil, making it suitable for a wide temperature range. This product contains organic...

Multemp SRL Multemp SRL is a lubricant grease for bearings, distinguished by its noise-reduction features and ability to operate within a wide temperature range. Globally recognized for its...

Multemp SA A grease designed for auto body applications, formulated with a base oil consisting of synthetic hydrocarbon oil and purified mineral oil. This product excels in low-temperature...

Kyodo Yushi Multemp TAS No. 2 is a lubricating grease designed for car bodies with the following exceptional properties: Excellent low-temperature performance, Outstanding water...